Shop
Showing 49–66 of 66 results
-
Meters
Microcomputer Digital pH Meter
PRODUCT DESCRIPTION:
Art No:PHS-3CW-HZ
Measuring Range(0.00~14.00pH
Mv:± 1999mV,Temperature: 0~100ºC
Resolution:Ph:0.01pH/0.1pH,temperature: ±1ºC
Accuracy: ±0.01pH and ±1.0ºC
Temperature Compensation: 0ºC~100ºC
(Manual compensation)
Electrode:E201-C plastic composite electrode
Operating Temperature:0ºC~40ºC and relative Humidity:<85%SKU: n/a -
Research & Analytical Equipment
Mobius Recycler
The ORTEC Möbius Recycler technology provides “tried and tested” liquid nitrogen cooling of your radiation detector in a system where LN2 requires refilling approximately once every other year under normal, continuous operating conditions. This is achieved by the integration of the Sunpower® cryocooler and a specially designed 27-litre liquid nitrogen dewar.
SKU: OSR0009 -
Research & Analytical Equipment
PARSTAT MC Multichannel Potentiostat
PARSTAT MultiChannel Family
-
- The PARSTAT MC (PMC) Family consists of the PARSTAT MC Chassis and several models of potentiostats: PMC-1000, PMC-2000A, PMC-200. This series of potentiostats is defined by offering superior performance as standard. These models complement each other. Both of these single-channel potentiostats operate in VersaStudio software with all techniques available, including Electrochemical Impedance Spectroscopy up to high frequency.
- The PMC-1000 provides a high current and a wide dynamic current range
- The PMC-2000A provides 6-WIRE measurement and high polarization voltage.
- The PMC-200 provides high throughput with 2 potentiostats per module and high resolution.
SKU: OSR0018 -
-
Agricultural Test Machines
PELLET TESTER 17000
Working Principle
Different methods are used to measure the quality of pellet feeds. The Pellet Durability Index (PDI) is one of the main parameters used to determine pellet quality because it indicates the percentage of pellets that remain intact after being submitted to mechanical forces. Pellet feeds are subjected to friction, impact and pressure during storage, transportation and shipping from factory to farm. Low-quality pellets are broken down, resulting in a fine-grained feed with few pellets. The Pellet Durability Tester uses tests developed by Kansas State University to predict the amount of fine particules that will be present in pellets at feeding time. The Test Result is interpreted as a standard measure of quality called the Pellet Durability Index (P.D.I). The testing steps are simple and a minimal amount of equipment is required.
SKU: n/a -
Research & Analytical Equipment
PINS3-CW-G2 Portable Isotopic Neutron Spectroscopy
PINS Overview
The Portable Isotopic Nuclear Spectroscopy (PINS) Chemical Identification System identifies dangerous compounds and mixtures non-destructively. The test object need not be opened or touched, providing significant safety benefits. As shown, PINS probes a test object with neutrons that excite the atomic nuclei within, causing the excited nuclei to produce gamma rays. The energy intensity pattern or spectrum of these gamma rays is unique for each chemical element, and by analyzing the gamma-ray spectrum, the PINS software identifies the chemical elements inside the test object and determines if the object contains a chemical warfare agent, a fill (such as sand), or a smoke generating chemical.SKU: OSR0019 -
Research & Analytical Equipment
PM1406 Food Contamination Monitor
Food Contamination Monitor PM1406
PM1406 Food Contamination Monitor is intended to measure the radionuclide activity in food and liquids. Instrument measures specific (for solid and dry substances) or volumetric (for liquids) activity 137 Cs + 40? nuclides in the sample. The instrument also enables permanent or periodic radiation monitoring of the ambient radiation background.
SKU: OSR0022 -
Research & Analytical Equipment
Radeagle
RADEAGLE is a state-of-the-art handheld, radioisotope identification device (RIID) delivering superior speed and accuracy.
- combining a large, high-sensitivity crystal with an intelligent algorithm, the RADEAGLE can quickly, accurately, and simultaneously detect and identify four or more isotopes, typically in under 30 seconds.
- ANSI 42.34 compliant, the RADEAGLE offers a user-friendly interface that is intuitive, simple to navigate, provides visual clarity, and utilizes an extensive array of alarms.
- Supports a variety of scintillation crystals including NaI(Tl), CeBr3 and LaBr3(Ce) to optimize performance across multiple applications.
- Incorporating decades of industry expertise in detection and identification algorithms along with advanced hardware, electrical, and software systems, the RADEAGLE is the hand-held RIID of choice
SKU: OSR0021 -
Agricultural Test Machines
RESISTOGRAPH 500
Working Principle
RESISTOGRAPH 500 represents the quality characterization of the flour sample to be analyzed in the form of a graph. The diagram resulting from the test is divided into strictly fixed single components and the evaluation results are given according to international standards.
The force on the analyzed sample is recorded graphically as a function of time, with the elongation force initially increasing, reaching a maximum with the increase in tensile force offset by the decrease in the other part of the sample. Then the slope gradually decreases, and after the dough breaks, it suddenly drops. In the graph obtained, the strength of the dough against its efforts in the spread analysis of the curvature, the density of the curvature is the elastic expression.
SKU: n/a -
Agricultural Test Machines
ROLLER MILL 4000
Working Principle
The wheat to be ground in the mill must first be sieved in the analysis sieve and purified from weed seeds and substances. Then, in order to easily separate the shell from the grain, it should be annealed by giving certain amounts of water and grinding process should be carried out.
SKU: n/a -
Agricultural Test Machines
SAMPLING PROBE 10100
Working Principle
The sampling system is a patented and internationally approved vacuum system. In automatic sampling probes, after the probe enters the product to be sampled, the sample is drawn homogeneously and 100% representatively and transported to the laboratory with specially produced hoses according to the type of sample. The sample coming to the cyclone in the laboratory waits for quality control analysis.
SKU: n/a -
Models
Sodium Chloride Molecular Model Kit
About this item
- Made of durable and colorful plastic
- Molecular geometry and bond angles can be visibly seen in the structure, making it great for studying
- Excellent molecular model kit for students studying chemistry in middle school or university
- A visual representation of molecular structures of common compounds and substances
- These unique molecular structures are excellent for v
SKU: n/a -
Models
VCM012 Silicon Dioxide Molecular Model
Silicon dioxide or also known as silica is a primary ingredient in the manufacturing of glass. It has an amazing diamond structure. This model is made of durable and colorful plastic, making it a great tool to learn about the structure of chemical molecules.
SKU: n/a -
Research & Analytical Equipment
VersaSTAT 4 Potentiostat Galvanostat
7280 has a wide band frequency to 2MHz to support Optics and Laser Research
- Frequency Range up to 2 MHz
- Dual reference and dual harmonic detection (standard to 20 kHz and options up to 2 MHz) allow signals at two different frequencies to be measured simultaneously
- Computer-controlled or full front panel
- GPIB, RS232 control
SKU: OSR0024 -
Lab Equipment
Weighing Bottle- Tall Form, Borosilicate Glass – 15mL – 25x50mm
Premium borosilicate glass weighing bottle with interchangeable ground stopper. 15mL capacity. 25x50mm.
Autoclavable, with superior chemical durability. Low temperature gradient- can withstand high temperatures & thermal shocks. Borosilicate glass has the following heat tolerances: Strain Point -515°C | Annealing Point 565°C | Softening Point 820°C.SKU: n/a
